EMP Pulse Blaster

Electro Magnetic Pulse - Pulse Blaster

Parameters

Parameter	Value/Equation
Range (r)	13 meters
Energy Density	$5\times 10^{5}$ to $10^{6}$ joules/m$^{3}$
Total Energy Output	$4.601\times 10^{9}$ joules
Voltage Output (High-Voltage Generator Modules)	3000V, 4000V, 400kV, 1MV

Equations

• ``Energy Density**: The energy density of the electromagnetic field.
  • $E={\frac {B^{2}}{2\mu _{0}}}$
    • Where:
      • $E$ is the energy density in joules per cubic meter (J/m$^{3}$)
      • $B$ is the magnetic flux density in teslas (T)
      • $\mu _{0}$ is the permeability of free space ($4\pi \times 10^{-7}$ H/m)

• ``Volume of a Sphere**: Used to calculate the volume of the area affected by the EMP.
  • $V={\frac {4}{3}}\pi r^{3}$
    • Where:
      • $V$ is the volume in cubic meters (m$^{3}$)
      • $r$ is the radius of the sphere in meters (m)

• ``Power Output (General)**: The power output during the EMP pulse.
  • ${\text{Power Output}}={\frac {\text{Total Energy Output}}{\text{Pulse Duration}}}$
    • Where:
      • Power Output is in watts (W)
      • Total Energy Output is in joules (J)
      • Pulse Duration is in seconds (s)

• ``Capacitor Energy Storage**: The energy stored in a capacitor.
  • $E={\frac {1}{2}}CV^{2}$
    • Where:
      • $E$ is the energy stored in joules (J)
      • $C$ is the capacitance in farads (F)
      • $V$ is the voltage in volts (V)

• ``Inductance of a Coil**: The inductance of a coil used in the EMP generator.
  • $L={\frac {N^{2}\mu _{0}\mu _{r}A}{l}}$
    • Where:
      • $L$ is the inductance in henries (H)
      • $N$ is the number of turns
      • $\mu _{0}$ is the permeability of free space ($4\pi \times 10^{-7}$ H/m)
      • $\mu _{r}$ is the relative permeability of the core material
      • $A$ is the cross-sectional area of the coil in square meters (m$^{2}$)
      • $l$ is the length of the coil in meters (m)

• ``Magnetic Flux**: The magnetic flux through a coil.
  • $\Phi =BA\cos(\theta )$
    • Where:
      • $\Phi$ is the magnetic flux in webers (Wb)
      • $B$ is the magnetic flux density in teslas (T)
      • $A$ is the area in square meters (m$^{2}$)
      • $\theta$ is the angle between the magnetic field and the normal to the surface

• ``Faraday’s Law of Induction**: The induced voltage in a coil.
  • $V=-N{\frac {d\Phi }{dt}}$
    • Where:
      • $V$ is the induced voltage in volts (V)
      • $N$ is the number of turns
      • ${\frac {d\Phi }{dt}}$ is the rate of change of magnetic flux in webers per second (Wb/s)

• ``Resonant Frequency of LC Circuit**: The frequency at which the LC circuit resonates.
  • $f_{0}={\frac {1}{2\pi {\sqrt {LC}}}}$
    • Where:
      • $f_{0}$ is the resonant frequency in hertz (Hz)
      • $L$ is the inductance in henries (H)
      • $C$ is the capacitance in farads (F)

• ``Magnetic Field of a Solenoid**: The magnetic field inside a solenoid.
  • $B=\mu _{0}{\frac {N}{l}}I$
    • Where:
      • $B$ is the magnetic field in teslas (T)
      • $\mu _{0}$ is the permeability of free space ($4\pi \times 10^{-7}$ H/m)
      • $N$ is the number of turns
      • $l$ is the length of the solenoid in meters (m)
      • $I$ is the current in amperes (A)

• ``Heat Dissipation in Resistors**: The power dissipated as heat in a resistor.
  • $P=I^{2}R$
    • Where:
      • $P$ is the power in watts (W)
      • $I$ is the current in amperes (A)
      • $R$ is the resistance in ohms (Ω)

• ``Ohm’s Law**: The relationship between voltage, current, and resistance.
  • $V=IR$
    • Where:
      • $V$ is the voltage in volts (V)
      • $I$ is the current in amperes (A)
      • $R$ is the resistance in ohms (Ω)

• ``Electromagnetic Wave Equation**: Describes the propagation of electromagnetic waves.
  • $\nabla ^{2}\mathbf {E} -\mu _{0}\epsilon _{0}{\frac {\partial ^{2}\mathbf {E} }{\partial t^{2}}}=0$
    • Where:
      • $\mathbf {E}$ is the electric field in volts per meter (V/m)
      • $\mu _{0}$ is the permeability of free space ($4\pi \times 10^{-7}$ H/m)
      • $\epsilon _{0}$ is the permittivity of free space ($8.854\times 10^{-12}$ F/m)
      • $t$ is the time in seconds (s)

Components

• ``Energy Storage and Management``
  • Super Capacitors
    • Capacitor Cells
    • Connecting Wires
    • SubModules
      • Capacitor Bank
        • Multiple super capacitors connected in series or parallel
      • Charging Circuit
        • Ensures capacitors are charged safely and efficiently
      • Discharge Mechanism
        • Rapid release of stored energy

• ``High-Voltage Generation``
  • High-Voltage Generators
    • Transformer
    • Rectifier Circuit
    • Switching Mechanism
    • SubModules
      • Control Unit
        • Microcontroller or PLC for managing switching
      • Voltage Multiplier
        • Series of capacitors and diodes to increase voltage
      • SubComponents
        • Inductor Coils
        • Diodes
        • Switching Transistors

• ``Electromagnetic Field Creation``
  • Coils
    • Wire
    • Core Material
    • SubModules
      • Primary Coil
      • Secondary Coil
    • SubComponents
      • Insulation Material
      • Mounting Brackets
  • Magnet Arrays
    • Magnets
    • Magnet Holders
    • SubModules
      • Focusing Array
      • Blocking Array
    • SubComponents
      • Shielding Material

• ``Pulse Control and Modulation``
  • Pulse Control Circuitry
    • Timing Circuit
    • Modulation Unit
    • SubModules
      • Oscillator
      • Amplifier
    • SubComponents
      • Capacitors
      • Resistors

• ``Power Supply``
  • Batteries
    • Battery Cells
    • Battery Management System (BMS)
    • SubModules
      • Charging Circuit
      • Protection Circuit
    • SubComponents
      • Thermal Sensors
      • Fuses

• ``Safety and Regulatory Compliance``
  • Safety Features
    • Overcurrent Protection
    • Voltage Regulation
    • SubModules
      • Circuit Breakers
      • Surge Protectors
    • SubComponents
      • Insulation Materials
      • Safety Relays

• ``Wire Gauge and Thermal Management``
  • Wire
  • Heat Sinks
  • SubModules
    • • Cooling Fans
      • Thermal Paste
  • SubComponents
    • • Temperature Sensors
      • Thermal Cutoffs

• ``Integration and Compatibility``
  • Connectors
  • Mounting Hardware
  • SubModules
    • • Interface Boards
      • Compatibility Testing Units
  • SubComponents
    • • Screws and Fasteners
      • Alignment Tools

Safety and Regulatory

• ``Safety Features``
  • Overcurrent Protection
  • Voltage Regulation
  • Insulation Monitoring

Additional Considerations

• Wire Gauge: Determine based on current and temperature rise.
• Amps and Volts: Dependent on design and requirements.
• Efficiency and Losses: Consider efficiency of components and system.
• Integration and Compatibility: Ensure compatibility and effective integration of components.
• Environmental Factors: Consider atmospheric conditions and electromagnetic interference.

Assembly and Testing

1. Assemble Super Capacitor Bank and High-Voltage Generators
2. Integrate Coils and Magnet Arrays with High-Voltage Output
3. Install Pulse Control Circuitry and Battery System
4. Implement Safety Features and Thermal Management
5. Perform Integration Testing to Ensure Compatibility and Performance
6. Conduct Safety Testing to Ensure Compliance with Regulatory Standards